You are here:
Print

HoloLens 2 est un nouveau périphérique matériel différent qui est facile à utiliser une fois que vous avez appris les interactions et les paramètres de base.

If you are starting the HoloLens for the first time, follow the Microsoft set-up experience to get started with the device and learn basic interactions. It is also recommended that new users read the “Getting Around” article from Microsoft prior to using the HoloLens 2.

Once you have completed the initial set-up, it is best to update your HoloLens from its default factory build.

Settings -> Update and Security -> Check for Updates
 

The device will take the user through the interaction tutorial when the HoloLens is first set up. 

To access the tutorial after setup, navigate to the Tips app in the HoloLens menu.

Menus in the FabStation app can be “pinned” in place to keep them from moving. 

To lock a menu in place, select the Follow Me switch to the off position. 

Quitter les applications immersives avec Hololens se fait selon la méthode suivante :

 – Use the start gesture to display the start icon on your wrist;

 – Click on the icon to launch the start menu;

 – Select the home button at the bottom;

 – Press the X on the resulting window to close the app.

Information

When closing Hololens immersive apps the app hologram will persist at the location where the app was launched.  The app hologram can be located where you physically started the app.

Pour améliorer les performances, assurez-vous de quitter l'application en fermant la fenêtre de l'hologramme avant d'éteindre l'Hololens.

Afin de préserver l'alimentation et de faire fonctionner FabStation de manière optimale, il est préférable d'éteindre complètement votre appareil entre les sessions.

Maintenez le bouton d'alimentation enfoncé jusqu'à ce que tous les voyants de la batterie s'éteignent et que vous entendiez un son de mise hors tension (si le son est audible).

This section describes the various optional settings you can change to optimize the performance of the HoloLens when using FabStation.

The first recommended setting is to turn the sign-in requirement to Never.  This is not required if you have a dedicated user that is using the Iris sign-in feature but makes life easier if multiple users will be using the HoloLens.

Settings -> Accounts -> Sign-in options
Warning

There is a risk that your privacy and/or data could be compromised if the device is accessed unlawfully.  Please consult your IT department to ensure this option is right for you.

Le Power and Sleep setting should be adjusted to ensure that the device will not go to sleep too frequently.  The setting shouldn’t be longer than 20 minutes on the battery, however, it should be set to at least one hour when plugged in.

Settings -> System -> Power and Sleep
Tip

When downloading a large project the Hololens can be plugged in and set down while you are waiting for it to complete.

The final setting adjustment removes all holograms and extraneous data between sessions when the correct power-down procedure is used.  Make sure to switch the Automatically Remove all Holograms option to On.

Settings -> System -> Holograms

Table of Contents

Powered by:
About Eterio Realities Inc.

Eterio Realities Inc. is a software development company that specializes in Augmented Reality for industry 4.0. Our flagship product, FabStation, uses break-through Mixed Reality technologies to visually place 3D assets into a worker’s normal workflow. This is done through the use of devices like the Hololens 2.

fr_CAFrançais du Canada