How Can We Help?
How to create a project (ZIP file) for FabStation
ZIP file is required when you upload a project data for the FabStation software to function. It may contain different files, such as IFC, KISS, PDF combined into one ZIP file for convenience.
Here you will learn more about the requirements of ZIP file and how to create it.
Files Overview
The files that you insert into ZIP and upload as a project should contain all the project data for the FabStation software to function. If data is incomplete or missing, there may be an error at a certain stage of your work with the project within FabStation.
Technically, only KSS file is required per upload for the FabStation to function, but in reality, you always want to pair a KSS with a PDF or IFC or both.
- If only KSS is uploaded, without IFC and PDF, neither Augmented reality (Auto-Fab/Fab-Assit etc.) will load, nor it will be possible to check the Drawings or 3D viewer.
- If KSS and IFC are uploaded without PDF, it will be possible to open AR featured (i.e. Auto-Fab) and check the 3D viewer, but the Drawings (2D) viewer won’t be accessible.
- If KSS and PDF are uploaded without IFC, you can only check the Drawings, but not AR features.
Here is the table that clarifies what is available with certain files uploaded:
| KSS only uploaded | KSS and PDF uploaded | KSS and IFC uploaded | KSS, IFC and PDF uploaded | |
|---|---|---|---|---|
|
Drawings |
⛔ |
✅ |
⛔ |
✅ |
|
3D Viewer |
⛔ |
⛔ |
✅ |
✅ |
|
Augmented Reality features: Auto-Fab Fab-Assist Auto-QC QC-Assit |
⛔ |
⛔ |
✅ |
✅ |
This features availability are also related to individual assemblies. For instance, if some assemblies within KSS files do not have the corresponding PDFs, it will not be possible to open them with Drawings, while 3D and AR feature will work.
ZIP file requirements
If project data is released in increments, it is important to upload each incremental update upon receipt.
The Project Upload ZIP file should contain the following files/folders:
Files:
- Project KSS file;
- Project IFC file (IFC 2×3);
- Project PDF files (assemblies and parts)
Structure:
- PDF Assemblies (in folder)
- Contains individual *.pdf files for each assembly. The PDF file name should start with the assembly name (i.e. “B1000-r0.pdf”)
- If an assembly requires more than one PDF, they should be merged into one file (i.e. “B1000-1-r0” and “B1000-2-r0” should be combined and saved as “B1000-r0”).
- If hyphens are used in assembly names, they must be reflected and present in the PDF file name.
- PDF Parts (in folder)
- Contains individual PDF files for each part;
- Should use the same naming convention as an assembly PDF.
Export Required Files from a Detailing Software
Once the files are uploaded, they will be processed and available for use on the shop floor.
The assembly model files will be updated based on the last upload. The PDF files will be updated based on the latest modification date and only the latest revision will be displayed.
English 
Français du Canada